8040 membrane housing is specially designed for membrane separation applications such as pure water production, wastewater treatment, water recycling and sea water desalination.
The product is available in both end port and side port; pressure rating from 150 psi to 1200 psi and length from 1 through 7 membrane elements.
The product quality meets international standard such as ASME.
Features:
‐ Smooth inner surface finishing for easy loading and unloading of membrane elements
‐ Both end entry and side entry are available
‐ Different size of side port connection is available in Side entry vessels
‐ Outer polyurethane paint for VU resistant
‐ Head seal area is formed on the mandrel surface, therefore more accurate.
‐ The head seal is captured and does roll during installation of head assembly
‐ Down‐stream conical shape thrust cone improve water flow pattern and allow installation of head assembly in any angle
‐ ISO9001:200 certification
‐ 100% hydro test at 1.5X operating pressure
Specification:
Specifications: |
End Entry |
Side Entry |
Available pressure rating (psi) |
150/250/300/450/600/800/1000/1200 |
|
Length (No. of elements) |
1 to 7 |
|
Shell Material |
FRP |
|
Shell Color |
White (other colors are available on request) |
|
Feed/reject port |
||
Size |
1.5” |
1.5”/2.0”/2.5” |
Connection |
Groove end |
|
Material |
SS316 (duplex SS for 1000 psi and above) |
|
Permeate port |
||
Size |
1” |
|
Connection |
Female NPT/BSP |
|
Material |
ABS |
|
Head assembly*1 |
Included |
|
Adaptor*2 |
included |
|
Straps and saddles |
included |
|
Packaging*3 |
PVC plastic wrapping with carton outer pack |
|
Max. operating Temp |
50℃ (122℉) |
Note:
*‐ Head assembly consists of Retainer lock bars, cast Aluminum bearing plate, ABS seal plate and lock nut, Head seal, permeate port o‐ring.
* – 0.125” OD Standard adaptor is provided. Adaptor of different dimension are available on request.
*– wooden crate for export packing.
All specifications mentioned above are subject to change without prior notice.
Ordering guide
Product Data Sheet | |
Product Name: |
8040 Membrane Housing End Port |
Number of element/vessel |
1 to 7 |
Membrane Type: |
8' x 40" spiral wound element |
Operating data: |
|
Operating pressure: |
250/300/450/600/800/1000/1200 psi |
Operating Temperature range: |
‐7℃ to 49℃ |
Permeate port back pressure: |
125 psi (8.6 bars) Max. |
Hydrostatic Test pressure: |
1.5 X operating pressure for 20 minutes |
Vessel dimensions: |
Refer to Drawing No (Table 1) |
Net weight: |
Refer to Drawing No (Table 1) |
Feed/concentrate port: |
|
Pipe size: |
1.5" IPS groove end standard |
Number of port: |
2 |
Port material: |
SS316 for 300 thr 600 psi,Duplex SS for 1000 and 1200 psi |
Side port Clocking: |
N/A |
Permeate port: |
|
Pipe size: |
1" FNPT |
Port material: |
30% Glass filled ABS |
Shell Color: |
White |
Accessories included: |
|
Straps, strap screws and saddles 2 sets below 3 element; 3 sets for 4 to 7 elements |
|
label |
4 ea |
Adaptor |
2ea |
Head assembly |
2 sets |
Head seal |
2 ea |
Adaptor o‐ring seal |
4 ea |
Packing: |
|
Individual vessel |
Plastic bubble wrap |
Bulk |
Wooden crate |
Contact:
Email:
http://www.rowater-ts.com/